If your Bissell ProHeat 2X Revolution Pet Turbo carpet cleaner isn’t spraying solution properly, it can be frustrating and hinder your cleaning routine. Often, the issue stems from clogs, blocked nozzles, or pump problems. This guide provides clear, practical steps to diagnose and fix the problem safely, restoring your cleaner’s spray function efficiently.
Before starting, ensure your machine is unplugged and ready for maintenance. Use the recommended cleaning solution and parts to avoid damage and ensure optimal performance.
Key Takeaways
| Common causes | Clogged solution nozzle or hose |
| Basic check | Ensure water and solution tanks are filled and properly installed |
| Simple fixes | Clear blockages and check for debris in the spray path |
| When to replace | Pump or internal parts if cleaning doesn’t resolve the issue |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Turn off and Unplug the Cleaner
Always disconnect your Bissell from power before performing any maintenance or troubleshooting. This prevents accidental activation and ensures safety while inspecting internal parts.
Amazon Product B08ZS3PSD6
As an affiliate, we earn on qualifying purchases.
Step 2: Check the Solution Tank
- Remove the solution tank from the machine.
- Ensure it is filled with clean water and Bissell Multi-Surface Solution, if applicable.
- Reinstall the tank securely, making sure it clicks into place.
If the tank isn’t properly seated or empty, it may prevent spraying.
Step 3: Inspect the Spray Nozzle and Hose
- Locate the spray nozzle at the front of the cleaner.
- Check for any visible debris, hair, or buildup blocking the nozzle.
- Remove the nozzle if possible and rinse it thoroughly under warm water.
- Examine the hose connected to the nozzle for kinks or clogs; clear any obstructions carefully.
Step 4: Clear Internal Clogs
If no visible blockage is found, you may need to flush the internal spray pathway:
- Mix a solution of equal parts warm water and white vinegar.
- Pour this solution into the solution tank.
- Run the cleaner in spray mode for a few seconds to help dissolve buildup inside the spray system.
Step 5: Check the Pump and Internal Components
If spraying still doesn’t occur, the pump might be clogged or malfunctioning. In this case:
- Refer to your user manual for access to internal pump parts.
- Inspect for blockages or damage.
- If you’re uncomfortable handling internal parts, consider contacting a professional repair service.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Model: 35799
- ✔ Power: TurboStrength Motor
- ✔ Noise Reduction: 50%
JORAIR Brush Replacement Compatible
- ✔ Compatibility: Multiple CrossWave models
- ✔ Package: 3 brushes + 3 filters
- ✔ Material: Durable plastic and brushes
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo is a powerful carpet cleaner equipped with TurboStrength Motor Technology, providing 40% more suction power and quieter operation. Its MAX Clean Mode tackles embedded dirt, stains, and allergens, making it ideal for deep cleaning pet messes. Proper maintenance, including clearing nozzle blockages, can keep it spraying effectively.
Pros:
- Powerful suction with TurboStrength Motor
- Quiet operation
- Effective pet stain removal
- Multiple cleaning modes
Cons:
- Can clog if not maintained
- Nozzle blockages common if debris accumulates
- Requires regular cleaning of internal parts
Best for: Pet owners and deep carpet cleaning
Not ideal for: Light or occasional cleaning tasks
Bottom line: A robust carpet cleaner with powerful features, but regular maintenance is key to consistent spraying.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible set offers three multi-surface brush rolls and filters, perfect for replacing worn or clogged brushes and maintaining spray efficiency on your Bissell cleaner.
Pros:
- Easy to install
- Restores cleaning power
- Compatible with multiple Bissell models
- Affordable replacement option
Cons:
- Only compatible with certain models
- Requires manual replacement
- Limited to brush and filter replacements
Best for: Extended maintenance and brush replacement
Not ideal for: Troubleshooting spray blockages directly
Bottom line: A practical set for replacing brushes and filters to keep your cleaner working smoothly.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying solution?
Common causes include clogged nozzles, blocked hoses, or internal pump issues. Following the troubleshooting steps can help identify and fix the problem.
Can I use any cleaning solution in my Bissell cleaner?
It’s best to use Bissell Multi-Surface Solution or other compatible cleaning formulas recommended by Bissell to ensure safety and optimal performance.
How often should I clean the spray nozzle and internal parts?
Regular cleaning after every few uses or when you notice spray issues helps prevent clogs. Deep cleaning with vinegar solution can extend the spray system’s lifespan.
Is it safe to repair internal parts myself?
If you’re comfortable with minor repairs and following your manual’s guidance, it’s generally safe. For complex issues, professional service is recommended.
Get Your Carpet Cleaner Spraying Again
By following these step-by-step troubleshooting tips, you can often resolve spray issues with your Bissell ProHeat 2X Revolution Pet Turbo. Regular maintenance and cleaning of nozzles and hoses will help keep your machine performing at its best. If problems persist, replacing worn brushes or internal parts can restore full functionality, ensuring your carpets stay clean and fresh.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
