If your Bissell carpet cleaner isn’t pulling up water and dirt as it should, it can be frustrating. A loss of suction often points to simple issues that can be fixed with basic troubleshooting. This guide walks you through practical, safe steps to restore your cleaner’s suction power and keep your carpets spotless.
Key Takeaways
| Check for blockages | Clogged hoses or filters can reduce suction. |
| Inspect the water and dirt tanks | Full tanks or improper placement can hinder performance. |
| Examine the brush roll and belts | Worn brushes or loose belts affect cleaning power. |
| Clean or replace filters | Dirty filters restrict airflow and suction. |
| Ensure proper assembly | Incorrect setup can cause suction loss. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Turn Off and Unplug Your Cleaner
Always disconnect your Bissell cleaner from power before performing any troubleshooting. This ensures safety and prevents damage while inspecting the machine.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Step 2: Check and Clear Blockages
- Remove the water tank, dirt tank, and any accessible hoses.
- Inspect hoses, nozzles, and filters for debris or obstructions.
- Use a long, flexible brush or a pipe cleaner to clear any clogs.
Blockages in these areas are common causes of suction loss.
Step 3: Inspect and Clean Filters
- Locate the filters, usually near the water tank or intake area.
- Remove and rinse them with warm water until clear.
- Allow filters to dry completely before reinstalling.
Dirty filters can significantly reduce suction power.
Step 4: Check Water and Dirt Tanks
Ensure tanks are properly seated and not overfilled. A full or improperly installed tank can block airflow. Empty and rinse tanks as needed, then reattach securely.
Step 5: Examine the Brush Roll and Belts
- Remove the brush roll cover according to your model’s instructions.
- Check for tangled hair, debris, or worn brushes.
- Inspect belts for cracks or looseness. Replace if damaged.
A functioning brush roll is essential for effective suction and cleaning.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18 lbs
- ✔ Tank Capacity: 1.25 gallons
- ✔ Power Consumption: 6.8 amps
JORAIR Brush Replacement Compatible
- ✔ Weight: 0.5 lbs per set
- ✔ Durability: High-quality materials
- ✔ Ease of Replacement: Simple snap-in design
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful cleaning with its TurboStrength Motor and dual DirtLifter PowerBrushes. It’s designed to tackle embedded dirt and pet messes with ease, making it a reliable choice for deep cleaning.
Pros:
- 40% more suction power
- Quiet operation with noise reduction
- Effective pet stain removal
- Fast drying with Express Clean Mode
Cons:
- Heavier than some models
- Requires regular filter cleaning
- Slightly higher price point
Best for: Pet owners and heavily soiled carpets
Not ideal for: Light cleaning or quick touch-ups
Bottom line: A powerful, pet-friendly upright cleaner with advanced features.
JORAIR Brush Replacement Compatible
Replacing worn brushes and filters can restore suction and improve cleaning efficiency. The JORAIR kit offers compatible multi-surface brush rolls and filters that fit Bissell CrossWave models, ensuring your machine performs like new.
Pros:
- Easy to install
- Affordable replacement parts
- Compatible with multiple models
- Includes brushes and filters
Cons:
- Limited to CrossWave series
- Not suitable for upright models
Best for: Maintaining your CrossWave machine in top condition
Not ideal for: For upright carpet cleaners like the ProHeat
Bottom line: A cost-effective way to keep your CrossWave performing well.
Frequently Asked Questions
Why does my Bissell carpet cleaner lose suction?
Common causes include clogged hoses or filters, full tanks, worn brush rolls, or improper assembly. Following troubleshooting steps can often resolve the issue.
How often should I clean the filters?
Inspect and rinse the filters every 1-3 months, or more frequently if you notice a drop in suction or cleaning performance.
Can I use regular household cleaner in my Bissell?
No, always use the recommended solutions such as the BISSELL Multi-Surface Solution or Deep Cleaning Concentrate to prevent damage and ensure optimal cleaning.
What if cleaning and checking doesn’t fix the suction problem?
If issues persist, contact Bissell customer service or consider professional repairs, especially if internal parts like the motor or seals are damaged.
Revive Your Carpet Cleaner for Peak Performance
With proper maintenance and troubleshooting, you can restore your Bissell carpet cleaner’s suction power and extend its lifespan. Regularly checking for blockages, cleaning filters, and replacing worn parts are key steps to keep your machine working efficiently. A little routine care can save you time and money, ensuring your carpets stay fresh and clean for years to come.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
