TL;DR
Get cleaning gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Hunker describes a do-it-yourself umbrella holder made by cutting the bottom off a capped plastic bottle and attaching a string loop. The bottle catches water from a folded, upside-down umbrella, but users should empty it after each use and let the umbrella dry fully.
Hunker has published a DIY method for making a hanging umbrella holder from a capped plastic bottle, offering a way to collect drips from a wet umbrella in a car or near a home entrance. The design uses the bottle’s neck to hold water, but the instructions say to empty it after use and dry the umbrella rather than leave it stored wet.
The holder is made by removing the bottle’s bottom, then making two holes near the cut opening for a string. The umbrella slides into the bottle upside down, with the capped neck at the bottom to catch water. String threaded through the holes and knotted can be joined into a loop for hanging. The source says the bottle should have a cap and be washed before the project begins.
Hunker’s instructions list a plastic bottle, a cutting tool and string as the basic materials. The cited creator, YouTuber ABC Upcycling, used a drill to make the string holes; the report says a knife or scissors can also be used. It recommends measuring the string based on where the holder will hang. Decoration is optional: the bottle can be left clear or covered with paint, fabric, decoupage or cord. Any glue should be kept away from the cap and opening, which need to remain accessible.
The report says the holder can be kept in a car or hung near an entryway or back door to limit water dripping onto surfaces. Its care instructions are clear: open the bottle and pour out collected water after each use, then open the umbrella indoors until it dries. The umbrella should not be left wet inside the bottle for an extended period, because Hunker warns that mildew could affect both the holder and umbrella.
A Simple Way to Catch Umbrella Drips
The project addresses a familiar practical problem: a rain-soaked umbrella can leave water in a car or on an indoor floor while it is being stored. A bottle holder provides a small container for the runoff and a loop for hanging the umbrella, rather than leaving it loose or setting it directly on a surface. That may be useful in a vehicle or an entryway where space is limited.
The method also reuses a plastic bottle that might otherwise be discarded. However, the source presents this as a household craft idea, not as a tested product or a guarantee against water damage. How well it works will depend on bottle size, umbrella fit and whether the holder is positioned securely. Regular emptying and drying remain part of using it responsibly.
umbrella drip catcher plastic bottle
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How the Bottle Holds the Umbrella
The design depends on the bottle being inverted relative to its usual position: the umbrella enters through the cut-off base, while the capped neck sits below it. Water running off the folded umbrella collects in the lower part of the bottle. The cap allows that water to be retained temporarily, but it must be opened to drain the container. The bottle’s cut edge also forms the opening through which the umbrella is inserted.
Hunker suggests washing off the bottle label with dish soap, steam or a glue remover before adding string or decoration. The report mentions both water and soft-drink bottles as possible materials, provided the container has a cap. It does not specify a required capacity, shape or plastic type, so readers would need to choose a bottle that can accommodate their umbrella and hang safely in the intended location.
““All you need is a plastic bottle with a cap, something to cut the plastic, and string.””
— Hunker report
As an affiliate, we earn on qualifying purchases.
Fit, Stability and Safe Cutting
The source does not report testing of the holder, its capacity or how much water it can contain. It also does not give measurements for the bottle or umbrella, or specify how much weight the string and bottle can safely support. Readers will need to check that the umbrella fits and that the hanging point is secure. The report notes knives or scissors as possible tools for making holes, but does not provide a detailed cutting-safety procedure; care is needed when cutting plastic, and the work should be done on a stable surface with hands clear of the blade.
It is also not established that the holder will prevent every drip or protect a particular floor or vehicle interior. The source offers a practical craft suggestion, not independent performance testing. Any decorative paint, adhesive or coating should be suitable for the plastic and allowed to dry fully before the holder is used, as the report advises for the finished craft.
As an affiliate, we earn on qualifying purchases.
Drain and Dry After Each Use
There is no product launch or follow-up milestone described in the source; this is a DIY project readers can make themselves. The next steps are to choose a suitable capped bottle, cut away its bottom, make holes for a measured string loop, and test the fit before hanging it where drips can be contained. Anyone adding paint, fabric or cord should let the materials dry completely before use and keep the bottle cap unobstructed.
After a rainy outing, remove the umbrella, open the bottle and discard the collected water. Then open the umbrella indoors until it is dry before putting it away. These steps follow the source’s guidance and reduce the chance of leaving standing water or a damp umbrella in the holder.
As an affiliate, we earn on qualifying purchases.
Key Questions
What materials are needed to make the holder?
The basic supplies are a capped plastic bottle, a cutting tool and string. Paint, fabric, cord or other decoration is optional.
How does the bottle catch water?
The bottle’s bottom is removed so the umbrella can slide in. Stored upside down, the umbrella drains toward the bottle’s capped neck, where water collects temporarily.
Can the umbrella stay in the bottle between uses?
Hunker advises against leaving a wet umbrella in the holder for long. Empty the bottle after each use and let the umbrella dry indoors before storing it.
Can the holder be decorated?
Yes. The report suggests paint, fabric, decoupage or wrapped cord. Keep decoration and glue away from the cap and opening, and let the finished holder dry completely.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
